22 Plate HHO generator for Big Trucks new improved kit

Price: $249.99

Item Location:      Minnesota
End Time:            2008-11-29T03:37:34.000Z
Ships To:             Worldwide

I am going to set the price to $249 inorder to get some good feedback on this after the feedback is done 5 or more the price will go back up to $299 get yours now. This item will start shipping out on Tuesday the 23rd

Here is a link to a youtube clip showing some of my stuff working http://www.youtube.com/watch?v=AkSevfPwJxU

Note to ebay this utube clip is my demonstration of my product working and as I see it complies with all ebay listine rules

New Note: purchasing this unit may qualify you to have the Hybrid vehicle exemption during end of year tax return I have read this in wikipedia.com now this I will not gurantee as stuff changes from year to year but purchasing this kit would pay for its self right there. Upon your purchase I will send you the tax information you will need to get your muney back there as well.

This is a kit that I have designed for larger working vehicles like a Semi truck where a normal hho generator will not give the driver as much as needed.

Unit is 13 1/2" tall and 14" wide thats to the end of the nipple and 5" deep, Now I own a Garage and I have seen many snake oils and garbage things come through the market. This is something that works and helps to increase mileage when installed and used correctly. This is not going to make your car run completely on water but with gas prices soon to be at $5 a gallon this will be something to help. I have and will test these units each and every one before they leave my shop.

This one uses 22 304 b stainless steel plates each plate is secured using nylon screws and nylon nuts. this also has no wires inside of the generator current is passed through stainless steel nuts and screws. Plates are +n-n+n-n+n-. If you have or want a different plate set up just ask I will comply to most of your needs. This one should fit nicely in most larger trucks.This kit will contain 1 hydrogen generator, 12 feet of red primary wire, 6 feet of black negative wire, 1 inline fuse, 5 feet of 3/8 clear hose. This is not a complete kit you will need 1 60 amp pwm which you can branch off to power the two generators or 2 30 amp pwms as you will want to keep the voltage at 30 amps

Now in purchasing this kit I assume that you have some basic automotive knowledge and can do some basic trouble shooting and work through issues. The most common issue I have had to help my customers work through is blowing fuses as any hydrogen generating unit heats up it will start to draw more energy and overheat. You have to try to keep your HHO system running at 30 amps there are two easy ways to fix this #1 and the best way is to get 2 - 30 amp PWM these are easily available at a price of about $35. The second we have had luck with is a simple old chrysler style ballast resistor these are available at you local auto Parts store for about $5. I will continue to add to this as much as I can to give you my customers as much knowledge as I can to ensure you have the best working product available. the choice is yours I would still say get the pwm its just better and easier. I still suggest using the PWM method as they are easier to use and more reliable.

Each unit is checked and ran before the unit ships out. I will also do the best I can to help you with any situations tat you run into. Look at my feedback compared to others you will see that I stand behind my product and help out when there is an issue. And there are issues that you will run into WITH ANY KIT. I have just been around long enough to know how to help you out.

Some of the common questions I have been asked are #1 how much hho does this kit produce. Well my answer is this I do not test each unit for how much hho is produced. The reason is this simply it takes too much time to test every unit. The only true way I know of to test each unit is first you need to take a large bottle lige a water cooler bottle and fill it with 1 liter bottlers of water. Marking each time you fill it with a marker showing where the water line was. Second step is to take a larger jug and put the one you marked fill both with water and keep the one you marked upside down and some how manage to get a tube to the underside of the tub you marked. let unit run filling the jug you marked as the air goes in this will displace the water causing the jug to rise past the marks that you wrote on the jug. You do this for 10 - 15 minutes or several times. You at this point using a mathematical equation to figure out the exact LPM. Well as you might think this takes a lot of time and in my estimation most people lie about what the unit that they are selling produces. As I do not think most buyers are going to go through this to check.

Why do I not contain flashback, O2 extenders and other such items with my auctions, Simple people buy these items and mark them up insanely and you can get them yourself. O2 extenders which is simply a sparkplug nonfouler you can find these at your local auto parts store in the red help packages for $5 for a set of 4, I have seen them here selling on ebay for $9 each. Flashback devices are a PCV valve again found at your local Auto Parts store which people stick on a hose use a fancy brass pinch clamp and call it something special, On and onthe hard part to these things is making the unit its self and finding the stainless steel you can't find it. You can go to the hard ware store and purchase steel and even if it says stainless it is probably not. If you make your own unit and on the top you get a brown frothy looking foam. You defeated your whole purpose and used a bad quality medal and will not work

2nd is it legal to make and use, Yes it is just about anything that you do to your own vehicle in this matter is legal. Its not like adding the blue lights or the dark tint where a police officer is going to stop you.

3rd will this kit work on a diesel? and that is a big yes it is very effective in diesel vehicles Semi trucks etc. I will be posting soon a double unit with larger water separator designed specifically for Semi Trucks. As the driver of a semi I understand your pain and anything that allows you to be more competitive will help your business. As well there is a large rest area off 101 and 94 not too far from my house if you are in the area I will hand deliver your unit to you.

4th What about winter time, well in the winter time you have to modify your unit to contain glycol (green antifreeze) I will be honest that it is not quite as effective during this time but it will help you to get better mileage still.

5th is it for real does this really work? And yes it does! do not expect to never pay for gas again but this will aid you to save on gas. These units and all like them using electrolysis split the hydrogen from the oxygen and send them down the line to be burnt during the combustion process. Oxygen and hydrogen both aid in the combustion process allowing you to use your fuel more efficiently.

As well you can now reach me through Email directly at Richieshhosolutions@usa.com this goes directly to my cell which is right by my side if you have questions. As well you can always reach me right here through Ebay.

Final note I have currently 3 of theese units made and are ready for shipment this is a trial here on ebay if it sells I will add and make more but I have had drivers looking for a two canister unit and I decided to make one.

I will ship theese just about anywhere but here are my runles #1 it must be shipped to a confirmed paypal adress if you cant do that do not bother. I leave feedback only after positive feedback is given. I will take care of my customers but have had customers looking for free stuff holding feedback over my head I would rather take a hit than give into some one in that case.

If you do not get a tracking number and info in 3 days let me know I want to make sure you have all your info as fast as possible

Thank you for your time and intrest you business is valuable to me and my family I want to earn it if you have a special request let me know I will do custom jobs. Like plate designs, multiple cells, etc just let me know what you want.

One of the questions I have been getting alot lately is why not a bubbler in my system and this is what sets my system apart from the others. A bubbler is made and used for a few reasons it is simply used to help remove water vapor from the HHO and provide some level of protection during a flashback. In my system I use a air water seperator which helps to seperate the water from the hho. And when there is water in the seperator you can remove it by simply opening the valve and letting the water out. In a semi it is rare for a flashback or misfire but if you desire a flashback I will include one for free you just need to ask. But in anyway you look at it its more effective at its job it costs me more a bubbler cost me about $5 to make the seperator is $25 and the flashback device is about $7. the end result though is a better quality product.

Now I am relisting theese but I have to say that it may take me a week to get theese out as I had a piece of metal removed from my right eye. Like any guy I thaught I can get away with out safety glasses while simply drilling through the metal plates. A shaving flew off went into my eye I had it removed by my wife and may take a few days to heal and get back on track. because of this I have the Make a deal up there like Monty Hall so shoot me an offer or any requests and lets see what we can work out